| A10-43N28D Rotek Slewing Ring Bearings | Static Load Rating (kN):254; Weight:2.40 KGS; Availability:In Stock; d:65mm; Reference Speed Rating (r/min):4800; B:33mm; Clearance:C3; Dynamic Load Rating (kN):259; D:140mm; Cage Type:Steel; Seals or Shields:Open Type; Limiting Speed Rating (r/min):3900; SKU:21313ejw33c3-timken; |
| L9-57E9Z Rotek Slewing Ring Bearings | Limiting Speed Rating (r/min):610; Weight:80.50 KGS; Availability:In Stock; Cage Type:Steel; Dynamic Load Rating (kN):2690; Reference Speed Rating (r/min):650; d:240mm; D:400mm; B:160mm; Seals or Shields:Open Type; Clearance:Standard; Static Load Rating (kN):4050; SKU:24148ejw33w45a-timke; |
| R9-63E3 Rotek Slewing Ring Bearings | h:27.781 mm; J max.:177.8 mm; R2:14.287 mm; Cap bolt:2 x 7/16-14 UNC; ba:26.194 mm; Housing:SAF 510; Da:90 mm; H:121.841 mm; Cap bolt, SAE grade:5; Initial grease fill:31.185 g; P180°:12.5 kN; Bearing limiting speed:9500 r/min; A2:89.297 mm; End plug (suffix Y):EPR 4; Mass pillow block:5.69 kg; J min.:165.1 mm; P120°:11.1 kN; Labyrinth ring:2 x LER 21; H2:23.813 mm; P90°:17.3 kN; |
| A8-17E10BC Rotek Slewing Ring Bearings | Static Load Rating (kN):1300; Clearance:C3; Dynamic Load Rating (kN):835; Grease Limiting Speed (r/min):1100; SKU:23228came4c3-nsk; B:88mm; Weight:18.80 KGS; Oil Limiting Speed (r/min):1500; D:250mm; Cage Type:Brass; Seals or Shields:Open Type; Availability:In Stock; d:140mm; |
| L6-29P9ZD Rotek Slewing Ring Bearings | D:320mm; Reference Speed Rating (r/min):1400; Static Load Rating (kN):2340; Weight:33.90 KGS; Clearance:C2; Cage Type:Steel; B:104mm; SKU:23138kejw507c08c2-ti; Availability:In Stock; d:190mm; Dynamic Load Rating (kN):1630; Seals or Shields:Open Type; Limiting Speed Rating (r/min):1200; |
| A18-89P1 Rotek Slewing Ring Bearings | B:25mm; Clearance:C3; d:75mm; Availability:In Stock; SKU:6215dduc3-nsk; Weight:1.19 KGS; D:130mm; Seals or Shields:Two Rubber Seals; Cage Type:Steel; Static Load Rating (kN):49.5; Dynamic Load Rating (kN):66; Grease Limiting Speed (r/min):3200; |
| R9-55N3 Rotek Slewing Ring Bearings | B1:183 mm; G2:G 1/4; G1:33 mm; Mass withdrawal sleeve:26 kg; Hydraulic nut:HMV 84 E; B2:193 mm; G:Tr 420x5; A:9 mm; d:400 mm; d1:380 mm; |
| R8-35E3 Rotek Slewing Ring Bearings | Pa:105 kN; Mass pillow block:110 kg; H:317.5 mm; Max. speed for PosiTrac Plus seal:850 r/min; Cap bolt, SAE grade:8; Housing:SSAFS 230; Stabilizing ring:SR-30-0; H2:63.5 mm; L:539.75 mm; dc:146.05 mm; db:168.275 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt:7/8-9 UNC; Da:269.999 mm; RG:3/4 NPT; PG:1/4 NPT; H1:160.35 mm; Labyrinth ring (dc shaft position):LOR 134; P60°:394 kN; Cap bolt recommended tightening torque:813.5 N·m; |
| L6-25N9Z Rotek Slewing Ring Bearings | ra max.:1 mm; B:133.35 mm; D:139.7 mm; b1:8 mm; Da max.:133.8 mm; d1 ≈:109.22 mm; Basic dynamic load rating C:1020 kN; Lubricant:Maintenance free &nd; Design (sliding contact surface combination):Steel/steel; α:5 °; C:66.675 mm; dk:128.016 mm; Sealing solution:Triple-lip seals; rb max.:1 mm; Basic static load rating C0:2040 kN; r1 min.:1 mm; d:88.9 mm; M:6.5 mm; Material constant KM:330; |
| A14-25P1 Rotek Slewing Ring Bearings | B:108mm; Cage Type:Steel; Limiting Speed Rating (r/min):1500; Availability:In Stock; Dynamic Load Rating (kN):1620; SKU:22330ejw33-timken; Static Load Rating (kN):1890; Reference Speed Rating (r/min):1600; d:150mm; D:320mm; Weight:40.60 KGS; Clearance:Standard; Seals or Shields:Open Type; |
| M4-22P4Z Rotek Slewing Ring Bearings | R1:58.737 mm; L:387.35 mm; Ca:55.804 mm; Da:180 mm; P120°:44.5 kN; A2:228.6 mm; h:39.688 mm; J min.:295.275 mm; Mass pillow block:28.6 kg; Housing:FSAF 024 KA; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Pa:16.7 kN; PG:1/4 NPT; Taconite seal:TER 111; P150°:40 kN; P60°:119 kN; Cap bolt:2 x 3/4-10 UNC; Initial grease fill:181.44 g; RG:3/8 NPT; |
| L6-37E9Z Rotek Slewing Ring Bearings | da:84.138 mm; Stabilizing ring:SR-24-20; Labyrinth ring:2 x LOR 100; P150°:66.7 kN; Ca:82.804 mm; P120°:72.5 kN; Initial grease fill:379.89 g; R2:30.163 mm; A1:120.65 mm; RG:1/2 NPT; P60°:185 kN; J max.:368.3 mm; h:51.594 mm; Pa:21.8 kN; Cap bolt:2 x 1-8 UNC; Cap bolt recommended tightening torque:1220 N·m; S:4.763 mm; J min.:336.55 mm; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; |