| NU2314EMA Timken Tapered Roller Bearing Assembly | Hydraulic nut:HMVC 16E; B:15.342 mm; G:79.68 mm; d:80 mm; Threads per inch:12; Sleeve:S 116x2.3/4; B1:81.128 mm; Mass adapter sleeve assembly:1.45 kg; B4:16.916 mm; d3 max.:105.689 mm; d1:69.85 mm; |
| EE321146D/32124 Timken Tapered Roller Bearing Assembly | d3:145 mm; d1:100 mm; B2:21.5 mm; Da max.:188 mm; Ba min.:6 mm; B:53 mm; B1:77 mm; s1 max.:11.1 mm; Misalignment factor k1:0.113; r1,2 min.:2.1 mm; Mass bearing + sleeve:8.8 kg; d2 ≈:132 mm; D1 ≈:176 mm; Basic dynamic load rating C:530 kN; Fatigue load limit Pu:64 kN; da max.:150 mm; db min.:118 mm; Da min.:161 mm; Operating clearance factor k2:0.103; ra max.:2 mm; |
| M249748D/M24971 Timken Tapered Roller Bearing Assembly | d2:101.6 mm; J max.:196.85 mm; H1:69.85 mm; Limiting speed:3100 r/min; B:85.725 mm; Basic dynamic load rating C:148 kN; H:142.875 mm; da:63.5 mm; Mass bearing unit:7.26 kg; A1:88.9 mm; L:234.95 mm; A:68.263 mm; Attachment bolt diameter G:15.875 mm; s:31.75 mm; J min.:173.037 mm; S:0.794 mm; H2:44.45 mm; |
| HM252347D/HM25231 Timken Tapered Roller Bearing Assembly | Reference speed:300 r/min; Da max.:459 mm; Basic static load rating C0:8000 kN; B:24 mm; Limiting speed:600 r/min; Mass bearing:39.5 kg; d1:535 mm; d:440 mm; r1,2 min.:2.1 mm; ra max.:2 mm; H:80 mm; Basic dynamic load rating C:1430 kN; D:540 mm; D1:444 mm; da min.:533 mm; Minimum axial load factor A:5.1; Fatigue load limit Pu:550 kN; |
| NJ319EMA Timken Tapered Roller Bearing Assembly | D:10 mm; Tolerance shaft:h8; Coefficient of friction µ min.:0.05; B:10 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Mass bushing:0.004 kg; Specific static load factor K0:20 N/mm²; d:5 mm; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; |
| HM261049TD/HM26101 Timken Tapered Roller Bearing Assembly | Material constant KM:330; Specific dynamic load factor K:150 N/mm²; l2 max.:194 mm; h:145 mm; G:M 42x3; l1 min.:76 mm; Basic dynamic load rating C:150 kN; α:6 °; d:40 mm; r1 min.:0.6 mm; d2 max.:94 mm; Basic static load rating C0:140 kN; l7 min.:46 mm; C1 max.:24 mm; B:28 mm; dk:53 mm; Mass rod end:1.9 kg; |
| M257248D/M25721 Timken Tapered Roller Bearing Assembly | Specific dynamic load factor K:10 N/mm²; B:25 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.1; d:12 mm; Permissible sliding velocity v max.:5 m/s; Mass bushing:0.058 kg; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; D:25 mm; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; |
| NU1030MA Timken Tapered Roller Bearing Assembly | Basic Static Radial Load Rating Co:180000 N; Sealed Speed Rating n3:1800 rpm; Basic Dynamic Radial Load Rating C:186000 N; Oil Speed Rating n2:2800 rpm; Accessories:Shield & Seal; d:105.000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:1800 rpm; D:190.0000 mm; B:65.10 mm; |
| NJ218EMA Timken Tapered Roller Bearing Assembly | da min.:1172 mm; d:1060 mm; ra max.:4 mm; D:1250 mm; Mass bearing (including seat washer where applicable):240 kg; Fatigue load limit Pu:112 kN; Minimum load factor A:5600; Limiting speed:400 r/min; H:115 mm; r1,2 min.:5 mm; d1 ≈:1244 mm; Basic dynamic load rating C:1010 kN; Basic static load rating C0:10400 kN; Da max.:1138 mm; Reference speed:300 r/min; D1 ≈:1066 mm; |
| EE724121D/724195 Timken Tapered Roller Bearing Assembly | P180°:107 kN; P120°:94.3 kN; Eye bolt:3/8-16 UNC; dc:115.888 mm; End plug (suffix Y):EPR 15; P150°:87.2 kN; L:419.1 mm; Cap bolt recommended tightening torque:298.3 N·m; P90°:149 kN; R1:79.375 mm; Mass pillow block:61.2 kg; R2:30.163 mm; RG:1/2 NPT; H:257.175 mm; PG:1/4 NPT; Cap bolt, SAE grade:8; Labyrinth ring (dc shaft position):LOR 119; Stabilizing ring:SR-24-20; da:120 mm; |
| L163149D/L16311 Timken Tapered Roller Bearing Assembly | B:14.00 mm; Basic Dynamic Radial Load Rating C:5530 N; Grease Speed Rating n1:17000 rpm; Basic Static Radial Load Rating Co:1180 N; Fillet Radius ra:0.60 mm; D:30.0000 mm; d:10.000 mm; |
| EE526131D/52619 Timken Tapered Roller Bearing Assembly | Recommended diameter for attachment bolts, mm G:16 mm; d:49.213 mm; J:157 mm; J7:20 mm; s1:32.7 mm; A1:15 mm; Thread grub screw G2:3/8-24 UNF; Limiting speed:4000 r/min; L:116 mm; Recommended tightening torque for grub screw:16.5 N·m; SWN:7 mm; Basic static load rating C0:23.2 kN; RG:1/4-28 UNF; GN:1/4-28 SAE-LT; DN:6.5 mm; N:18 mm; B4:6.75 mm; A:43 mm; A3:3.2 mm; Db1:107 mm; |