| EE671798D/672873 Timken Tapered Roller Bearing Assembly | End plug (suffix Y):EPR 8; P60°:54.3 kN; J max.:244.475 mm; Cap bolt:2 x 1/2-13 UNC; Da:130 mm; dc:71.438 mm; Appropriate attachment bolt size G:0.5 in; Pa:14.2 kN; Initial grease fill:136.08 g; Cap bolt, SAE grade:5; R2:21.431 mm; RG:1/4 NPT; Taconite seal (db shaft position):TER 79; A1:79.375 mm; P90°:32.5 kN; ba:30.163 mm; J1:47.625 mm; Mass pillow block:12.2 kg; h:31.75 mm; Stabilizing ring:2 x SR-15-0; |
| LM377449D/LM37741 Timken Tapered Roller Bearing Assembly | ra max.:1.5 mm; l:8 mm; b:4 mm; Mass bearing pair:2.87 kg; K:3 mm; Calculation factor Y2:2.3; C:52 mm; d1 ≈:108.1 mm; Basic static load rating C0:450 kN; D:130 mm; db min.:95 mm; Reference speed:3200 r/min; rc max.:0.6 mm; Db min.:125 mm; Calculation factor Y1:1.5; Calculation factor e:0.44; Calculation factor Y0:1.4; Fatigue load limit Pu:51 kN; d:85 mm; r1,2 min.:1.5 mm; |
| EE231401D/232025 Timken Tapered Roller Bearing Assembly | r1,2 min.:0.3 mm; r2 max.:1 mm; Lw:25.8 mm; Dw:4 mm; Mass needle roller:2.55 g; r1 max.:0.8 mm; |
| NU2219EMA Timken Tapered Roller Bearing Assembly | B2:131 mm; Mass withdrawal sleeve:4.48 kg; G1:20 mm; G:M 200x3; d:190 mm; Hydraulic nut:HMV 40 E; d1:180 mm; B1:125 mm; |
| NU324EMA Timken Tapered Roller Bearing Assembly | Basic dynamic load rating C:16000 kN; Da max.:1180 mm; r1,2 min.:9.5 mm; s1 max.:33 mm; Limiting speed:450 r/min; D1 ≈:1077 mm; ra max.:8 mm; d2 ≈:884 mm; D:1220 mm; Basic static load rating C0:30500 kN; Reference speed:320 r/min; Ca min.:9.3 mm; B:365 mm; Da min.:1025 mm; da max.:883 mm; Mass bearing:1802 kg; da min.:790 mm; Operating clearance factor k2:0.094; Fatigue load limit Pu:1800 kN; |
| NJ2328EMA Timken Tapered Roller Bearing Assembly | H1:42.9 mm; d:30 mm; A:40 mm; Recommended diameter for attachment bolts, mm G:12 mm; s1:23 mm; L:152 mm; Housing:SY 506 M/VZ033; B1:37 mm; J:117.5 mm; A1:25 mm; Hexagonal key size for grub screw N:2.5 mm; A5:20 mm; J7:14 mm; Basic static load rating C0:11.2 kN; Recommended tightening torque for grub screw:4.2 N·m; Recommended diameter for attachment bolts, inch G:0.5 in; Limiting speed:1200 r/min; |
| EE328167D/328269 Timken Tapered Roller Bearing Assembly | Grease:194 kN; Static (Cor):5.5 mm; with tapered bore:4 500 min-1; d:45 mm; D:100 mm; Dynamic (Cr):3 mm; Pu:167 kN; B:36 mm; with cylindrical bore:3 700 min-1; rs (min):1.5 mm; Oil:23.660 kN; |
| LM263149D/LM26311 Timken Tapered Roller Bearing Assembly | d:35.000 mm; Accessories:No Shield, no Seal; B:30.20 mm; Basic Static Radial Load Rating Co:36500 N; Sealed Speed Rating n3:6000 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6000 rpm; Basic Dynamic Radial Load Rating C:39100 N; Oil Speed Rating n2:8000 rpm; D:72.0000 mm; |
| M272749D/M27271 Timken Tapered Roller Bearing Assembly | d2:62.706 mm; H:98.425 mm; H2:28.575 mm; A:53.975 mm; Mass bearing unit:3.63 kg; Limiting speed:6000 r/min; B:69.85 mm; L:187.325 mm; A1:72.231 mm; H1:47.625 mm; Attachment bolt diameter G:12.7 mm; Basic dynamic load rating C:73.8 kN; da:36.513 mm; S:0.794 mm; J min.:142.875 mm; J max.:149.225 mm; s:25.4 mm; |
| EE161362D/16185 Timken Tapered Roller Bearing Assembly | da:160.338 mm; Cap bolt recommended tightening torque:1220 N·m; S:4.763 mm; Stabilizing ring:SR-36-30; A2:254 mm; Mass pillow block:189 kg; L:679.45 mm; Max. speed for PosiTrac Plus seal:875 r/min; A1:180.975 mm; H:377.825 mm; H1:190.5 mm; P90°:320 kN; P180°:202 kN; H2:76.2 mm; J max.:600.075 mm; Housing:SAFS 536; Eye bolt:2 x 3/8-16 UNC; Labyrinth ring:2 x LOR 146; PG:1/4 NPT; Appropriate attachment bolt size G:1 in; |
| 89108D/89148 Timken Tapered Roller Bearing Assembly | Oil Speed Rating n2:5300 rpm; B:47.60 mm; Grease Speed Rating n1:4000 rpm; Fillet Radius ra:2.00 mm; d:50.000 mm; D:110.0000 mm; Sealed Speed Rating n3:4000 rpm; Basic Dynamic Radial Load Rating C:85200 N; Basic Static Radial Load Rating Co:64000 N; Accessories:No Shield, no Seal,; |
| 89108D/8915 Timken Tapered Roller Bearing Assembly | l4 max.:284 mm; Basic static load rating C0:530 kN; d4 ≈:92 mm; d2 max.:162 mm; h1:200 mm; α:6 °; w:80 mm; G:M 56x4; d:70 mm; l5 ≈:40 mm; l7 min.:80 mm; l3 min.:80 mm; Mass rod end:10.5 kg; B:49 mm; C1 max.:43 mm; Basic dynamic load rating C:315 kN; dk:92 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:1 mm; Material constant KM:330; |